Ubiquiti airFiber 5U Guide de l'utilisateur télécharger pdf (Page 23)

Alignment

Tips

• To accurately align the airFiber radios for best performance,

you MUST align only one end of the link at a time.

• You may need to use additional hardware to compensate for

issues such as the improper orientation of a mounting pole

or significant elevation differences between airFiber radios.

Establishing a Link

Adjust the positions of the Master and the Slave to establish

a link. The following guide features the airFiber antenna,

AF-5G30-S45:

Note: The Master must be aimed first at the Slave because

the Slave does not transmit any RF signal until it detects

transmissions from the Master.

1. Master Visually aim the Master at the Slave. To adjust the

Master’s position:

a. Loosen the four pole clamp nuts, and rotate the airFiber

antenna on the pole to align the azimuth.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28

Pas de commentaire

Ubiquiti airFiber 5U Guide de l'utilisateur Page 23